Latest roller sale Tenders | Government roller sale Tenders

State Government

CTN :39410742

25 Feb, 2025 1.29 Lacs

Pali - Rajasthan

Tender For work2earthwork in filling, digging a pit on the side of the road and lifting the soil 1.5 meters and taking it up to 50 meters, breaking the lumps and laying them in 25 cm layers and pressing and leveling and making camber. 1kmdurihard soillaying, spreading and tamping of gravel, kankar, quarry rubble and coarse aggregate not less than 15 cms thickness (without crushing) on ??the specified camber and grade of the road and tamping with the help of roller weighing 8-10 tons and including all lead, water charges and hire of tools and machinery.

CTN :38769654

22 Feb, 2025 NA

Kamega - Arunachal Pradesh

Tender For bid to ras bid to ras supply of tamarind block making machine , mini road roller

CTN :39387314

25 Feb, 2025 10.00 Crore

Muzaffarpur - Bihar

Tender For rrsmp-24-25 muzaffarpur east -1 -01 - t02 - bargaw to shankarpur, clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per technical specification clause 301.4., construction of subgrade and earthen shoulders :-construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., granular sub-base with well graded material (table 400.1) :- construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., wbm grading 3 (by mechanical means ) :- providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., wet mix macadam:- providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406., prime coat (low porosity) :- providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., tack coat :- providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., bituminous macadam -providing and laying bituminous macadam with 100-120 tph hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over apreviously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction., tack coat :- providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., semi-dense bituminous concrete :- providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 p

CTN :39387315

25 Feb, 2025 25.82 Crore

Muzaffarpur - Bihar

Tender For rrsmp/24-25 muzaffarpur east-1/02 - t03 - mansurpur to beruadih (odr2), clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per technical specification clause 301.4., dismantling of existing structures, like culverts, bridge,retaining wall and other structures comprising of brick masonary including unserviceable material and stacking the serviceable material with all lift and lead of 1000m as per technical specification clause 202., dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per technical specification clause 202., construction of subgrade and earthen shoulders :-construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per technical specification clause 302.3, granular sub-base with well graded material (table 400.1) :- construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., wbm grading 3 (by mechanical means ) :- providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., wet mix macadam:- providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406., prime coat (low porosity) :- providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., tack coat :- providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., bituminous macadam -providing and laying bituminous macadam with 100-120 tph hot mix plant produci

Central Government/Public Sector

CTN :39402760

12 Mar, 2025 NA

Tumkur - Karnataka

Tender For supply of boq runway marking paint = white acrylic road marking paint , yellow acrylic road marking paint , roller type paint brush 9 inch , roller type paint brush 6 inch , flat metallic wire brush

CTN :39390437

24 Feb, 2025 NA

Dimapur - Nagaland

Tender For supply and installation of maint stores in hq 3 corps aor - , supply and installation of maint stores for poklain jcb (js-140) all complete as per bid., overhaling of engine js 140 with material, repair of hyd pump, repair of bucket mounting stud, repair of hyd boom cyl, denting of cabin and repair of work, supply and installation of maint stores for mtrl handler machine ( hydra) all complete as per bid., transmission filtter, brake cylinder kit left & right, frond brake presser line, fuel filtter secondary, engine oil filter, fuel filter primary, lifting strap, chain with d shackle, hyd filter, bty +ve & -ve lead, air filter element dust cap rubber, supply and installation of maint stores for mini excavator tmx-20 all complete as per bid., ignition switch, teeth nut & bolt, grease nipple, bty terminal, hydraulic hose, hydraulic cyl kit, bty 12 v 60 ah, bucket, track chain assy, supply and installation of maint stores for vibratory soil compactor with plain drum all complete as per bid., air cleaner assy, oil filter, fuel filter (primary & secondary), hyd filter, ignition key, head light, supply and installation of maint stores for concrete mixter machine all complete as per bid., fuel filter, oil filter, fuel flexible pipe (tank to filter), fuel flexible pipe (filter to fuel pump), fuel high pressure line, fuel pump single element, injector assy, shims (between fuel pump and body), cam shaft with cam gear, inlet & exhaust valve, valve grinding paste, compression ring assy complete, push rod, push rod seal (upper & lower), air cleaner assy, silencer assy, benjo bolt, chain set for concrete mixture machine, fuel tank assy, starting handle, mixture machine overhauling, repair and greasing, tyre size 165/80r14, tube inner 165/80r14, chain sporcket, supply and installation of maint stores for walk behind road roller all complete as per bid., bty 12v 42 ah, rope starting assy, air filter, fuel filter (1/2 ltr), cock knob, ignition switch, coupling, iron cutting blade 14" make - bosh, tile cutter blade 4" make- bosch, adaptor for drill machine magnetic (8mm), concrete drill bits of all sizes, supply and installation of maint stores for zig saw machine all complete as per bid., blade for zig saw machine, nut, stud, fuel filter, tension screw gear type, starter spring single, air cleaner, oil filter, manifold rubber, petrol cap, supply and installation of maint stores for chain saw machine all complete as per bid., servicing of chain saw machine, chain for chain saw machine model: ms 170/ms/170, spark plug model 170, eng oil 2t, guide bar, crank case assy, screws and bolts, handle clamps, point set (flat content), break assy, petrol tank, starter assy, cyl cover, supply and installation of maint stores for chain saw machine all complete as per bid., chain for chain saw machine model ms382, cleaner cover, front guard, needle bearing for position, ignition coil, oil pump, sprocket, clutch drum, clutch, fly wheel metal, piston set, oil cap, nut, stud, fuel filter, tension screw gear type, starter spring single, air cleaner, oil filter, manifold rubber, petrol cap, supply and installation of maint stores for needle vibrator machine all complete as per bid., needle, starting rope, spark plug, cap for spark plug, cap for spark plug, supply and installation of maint stores for portable hand carried 2 gallon, 12v air compressor for spray painting all complete as per bid., fan belt, hose with spray gun, supply and installation of maint stores for diesel engine bs- vi hopper tipper all complete as per bid., diesel exhaust fan, fan belt, oil filter, fuel filter, bty 12 v 60 ah, break oil, coolant, power sreering oil, air filter, grease, lander, gear box oil, housing oil, temp switch, hyd oil, hydraulic hose, power break hose, wheel bearing, supply and installation of maint stores for plate vibrator all complete as per bid., starting rope, spark plug, cap for spark plug, carburators, fuel pipe, supply and installation of m

CTN :39387099

11 Mar, 2025 NA

Jalpaiguri - West Bengal

Tender For supply of eng oil filter for bd 50 , wiper blade for bd 50 , cut hose for bd 50 , fuel filter baby for bd 50 , fuel filter cotton type for bd 50 , master switch for ssl , air element filter for ssl , indicator for ssl , drain plug for ssl , drain plug copper for ssl , oil pressure guage for bd 80 , stopper switch for bd 80 , gear lever knob for bd 80 , air element filter for bd 80 , arm rest for bd 80 , rock breaker hose pipe with adopter for jcb 3dx super , main shaft for road roller , tail assy for road roller

corporations/Associations/Others

CTN :39397068

27 Feb, 2025 NA

Bengaluru - Karnataka

Tender For auction sale of scrap - two wheeler 12 nos - four wheeler 1 no and road roller 1 no

State Government

CTN :39243401

27 Feb, 2025 38.30 Lacs

Firozpur - Punjab

Tender For corrigendum : various seasonal arrangements for the year 2025 26 for market committee makhu - various seasonal arrangements for the year 2025 26 in various mandis under the notified area of market committee makhu, making 50mm x 50mm furrows on existing road surface, dismantling stone pitching or soling (stone pitching dry) csr 8.2a, dismantling of existing brick on end edging complete in all respect as per pwd specifications., providing and laying of brick on end edging 6.83cm wide, 11.11cm long and 22.86cm high half brick deep including excavation, refilling and disposal of surplus earth up to 50mtr complete as per punjab pwd specifications., relaying of recovered material obtained from dismantling of road crust as construction of granular sub-base by providing coarse graded material grading-ii sopreading in uniform layers with motor grader on prepared surface, mising by mix by mix in place method with rotavator at omc, and compacting with vibratory roller to achive the desired density, complete as per technical clause 401 o morth&h specifications, compacting dismentled stone aggregates of grading ii to water bound macadam specification,rolling with smooth wheeled roller 8- 10 tonnes complete as per technical, water bound macadam grading ii (csr 24.13 ii) providing, laying, spreading and compacting stone aggregates of grading ii to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8- 10 tonnes in stages to proper grade and camber, complete as per technical clause 404 of mort&h specifications without screeening., water bound macadam grading iii providing, laying, spreading and compacting stone aggregates of grading ii to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8- 10 tonnes in stages to proper grade and camber, applying and brooming water bound macadam grading ii requisite type of binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete a, providing and laying surface dressing in single coat using crushed stone aggregates of specified size on a layer of bituminous binder vg-10 @ 1kg per sqm laid on prepared surface after cleaning the road surface and rolling with 8-10 tonne smooth wheeled steel roller complete as per technical clause 510 of mort&h specifications, credit of materials (from raising & strengthening) bricks, credit of materials (from raising & strengthening) bricks bats, providing and applying tack coat with penetration grade bitumen vg-10 using bitumen pressure distributor at the rate of 0.40 kg per sqm on the prepared bituminous surface/granular surface treated with prime coat after cleaning the surface complete as per technical clause 503 of mort&h specifications (csr 24.18 b), providing, laying and compaction of open - graded premix surfacing of 20 mm thickness consisting of crushed stone aggregates of specified grading premixed in a batch type hot mix plant with bituminous binder vg-10 @ 1.46kg per sqm, laid with paver and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades complete as per technical clause 511 of mort&h specifications. including carriage of mixed material plant to site of work, providing and laying of premix sand seal coat premixed in batch type hot mix plant using specified fine aggregates and penetration grade bitumen vg-10 @ 0.68kg per sqm, laid to the specified levels, grade and cross fall complete as per technical clause 513 of mort&h specifications. including carriage of mixed material plant to site of work., earth work excavation in ordinary soil, kassi work undressed involving an avarage horizontal throw upto 2.00 meters and an avarage vertical lift upto 0.50 metre incincluding breaking of cloadsas ., cautionary sign board 600x600x600mm triangular as per irc 67-2001 with retro reflective h

State Government

CTN :39243441

27 Feb, 2025 30.15 Lacs

Firozpur - Punjab

Tender For corrigendum : various seasonal arrangements for the year 2025 26 for market committee panje ke uttar - various seasonal arrangements for the year 2025 26 in various mandis under the notified area of market committee panje ke uttar, making 50mm x 50mm furrows on existing road surface, dismantling stone pitching or soling (stone pitching dry) csr 8.2a, dismantling of existing brick on end edging complete in all respect as per pwd specifications., providing and laying of brick on end edging 6.83cm wide, 11.11cm long and 22.86cm high half brick deep including excavation, refilling and disposal of surplus earth up to 50mtr complete as per punjab pwd specifications., relaying of recovered material obtained from dismantling of road crust as construction of granular sub-base by providing coarse graded material grading-ii sopreading in uniform layers with motor grader on prepared surface, mising by mix by mix in place method with rotavator at omc, and compacting with vibratory roller to achive the desired density, complete as per technical clause 401 o morth&h specifications, compacting dismentled stone aggregates of grading ii to water bound macadam specification,rolling with smooth wheeled roller 8- 10 tonnes complete as per technical, water bound macadam grading ii (csr 24.13 ii) providing, laying, spreading and compacting stone aggregates of grading ii to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8- 10 tonnes in stages to proper grade and camber, complete as per technical clause 404 of mort&h specifications without screeening., water bound macadam grading iii providing, laying, spreading and compacting stone aggregates of grading ii to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8- 10 tonnes in stages to proper grade and camber, applying and brooming water bound macadam grading ii requisite type of binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete a, providing and laying surface dressing in single coat using crushed stone aggregates of specified size on a layer of bituminous binder vg-10 @ 1kg per sqm laid on prepared surface after cleaning the road surface and rolling with 8-10 tonne smooth wheeled steel roller complete as per technical clause 510 of mort&h specifications, credit of materials (from raising & strengthening) bricks, credit of materials (from raising & strengthening) bricks bats, providing and applying tack coat with penetration grade bitumen vg-10 using bitumen pressure distributor at the rate of 0.40 kg per sqm on the prepared bituminous surface/granular surface treated with prime coat after cleaning the surface complete as per technical clause 503 of mort&h specifications (csr 24.18 b), providing, laying and compaction of open - graded premix surfacing of 20 mm thickness consisting of crushed stone aggregates of specified grading premixed in a batch type hot mix plant with bituminous binder vg-10 @ 1.46kg per sqm, laid with paver and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades complete as per technical clause 511 of mort&h specifications. including carriage of mixed material plant to site of work, providing and laying of premix sand seal coat premixed in batch type hot mix plant using specified fine aggregates and penetration grade bitumen vg-10 @ 0.68kg per sqm, laid to the specified levels, grade and cross fall complete as per technical clause 513 of mort&h specifications. including carriage of mixed material plant to site of work., earth work excavation in ordinary soil, kassi work undressed involving an avarage horizontal throw upto 2.00 meters and an avarage vertical lift upto 0.50 metre incincluding breaking of cloadsas ., cautionary sign board 600x600x600mm triangular as per irc 67-2001 with

Roller Sale Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

corporations/Associations/Others

State Government

State Government